The Schneider Electric LC1F1504M7 is a TeSys F 4-pole contactor rated 250 A in AC-1 duty (resistive load) at ≤440 V, with a 220 V AC 40-400 Hz control coil. The power circuit terminates on bar or lug connections up to 120 mm²; the control circuit uses screw-clamp terminals accepting 1 to 4 mm² flexible or solid. Front-face IP2X protection with shrouds per IEC 60529 means the panel cover stays on during operation — no exposed live parts at the nameplate.
The 220 V AC coil pulls 770 VA inrush and holds at 8.1 VA. Drop-out range is 0.2 to 0.55 Uc at 55 °C. Mounting is plate-mount, not DIN rail. The footprint is 200.5 mm wide × 170 mm high × 171 mm deep. Power circuit torque is 18 N.m; control circuit torque is 1.2 N.m. Ambient operating range is -40 to 60 °C, storage -60 to 80 °C.
Compliance and approvals — what the nameplate carries
The LC1F1504M7 is tested to IEC 60947-1, IEC 60947-4-1, EN 60947-4-1, EN 60947-1, and JIS C8201-4-1. Rated insulation voltage is 1000 V per IEC 60947-4-1, or 1500 V per VDE 0110 group C.