Skip to main content
Schneider Electric LC1G1854LSEA

Schneider LC1G1854LSEA TeSys Giga, 4P 185A AC-3

MPN LC1G1854LSEA
Active

Schneider Electric TeSys Giga 4-pole contactor, LC1G1854LSEA, rated 185 A AC-3 / 305 A AC-1, 200-500 V AC/DC coil.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LC1G1854LSEA key specifications
ParameterValue
Main product or component typeContactor
Voltage<= 460 V DC
Coil voltage200...500 V AC 50/60 Hz 200...500 V DC
Insulation voltage ui1000 V
Current185 A (at 305 A (at <104 °F (40 °C)) at <= 1000 V AC-1
Breaking capacity1610 A at 440 V
Utilization categoryAC-3 AC-3e AC-1 AC-5 a AC-5b AC-6 a AC-6b DC-1 DC-3 DC-5
Terminal pitch1.4 in (35 mm)
Temp storage max80 °C
Temp storage min-60 °C
Temp operating max60 °C
Temp operating min-25 °C

All specifications

LC1G1854LSEA additional specifications
ParameterValue
Storage temperature-76...176 °F (-60...80 °C)
ColorDark grey
Depth7.6 in (193 mm)
Width5.6 in (143 mm)
Height10.04 in (255 mm)
Mechanical life cycles8 Mcycles
ApplicationPower switching
Operating time40...70 ms closing 15...50 ms opening
Operating temperature-13...140 °F (-25...60 °C)
Permissible ambient air temperature around the device-40...158 °F (-40...70 °C) at Uc

Product details

Rated for 185 A in AC-3 duty (motor switching) and 305 A in AC-1 (resistive loads), with a coil accepting 200...500 V AC 50/60 Hz or DC.

Ratings that govern fit

For resistive bank or heater loads, the AC-1 thermal continuous current (Ith) is 305 A per pole, dissipating 20 W per pole at that level. Mechanical durability is 8 Mcycles, and the maximum operating rate hits 600 cycles/h in AC-3. Coil power consumption shows an inrush of 215 W DC, but the built-in bidirectional peak limiting keeps the hold-in draw lower. Drop-out threshold is 0.1 to 0.45 Uc (at <60 °C), which is wide enough to avoid nuisance drop on moderate sags.

Mounts on a plate; dimensions: 255 mm high, 193 mm deep, 143 mm wide. Power terminals accept bar or bolted lugs up to 185 mm². Control circuit uses push-in terminals for 0.2…2.5 mm² stranded or solid. Tightening torque for main connections: 18 N·m.

MPN
LC1G1854LSEA