The LC2K09013E7 is a TeSys K reversing contactor from Schneider Electric, a 3-pole unit rated 9 A in AC-3 duty at up to 440 V, with a 48 V AC coil and one NC auxiliary contact. It ships preassembled with the reversing power busbar, so you don't have to wire the mechanical interlock or bus links yourself — it's ready to drop into a panel and terminate the motor leads. The AC-3 rating covers motor starting and stopping under load. For resistive loads (AC-1), the contactor can handle higher current. The 48 V AC coil is a specific control voltage. Verify your control circuit voltage matches.
If you need a drop-in replacement, the closest active sibling in the TeSys K family would share the same footprint and AC-3 rating but with a different coil voltage or auxiliary contact configuration — verify the control voltage and aux contact count before substituting. The reversing busbar assembly is specific to this preassembled variant. For compliance documentation, the part carries UL 94 V1 flame retardance and IP20 per VDE 0106. No RoHS or REACH status is stated in the available records, so if your quality system requires those declarations, request them with the RFQ.