The Schneider Electric TeSys K LC2K12013P7 is a reversing contactor — a single package that handles forward and reverse switching for a three-phase motor, preassembled with the reversing power busbar so you don't have to wire the interlock yourself. Rated AC-3 at 12 A up to 440 V, it covers small motor loads like pumps, fans, and conveyors in control panels. The 230 V AC coil pulls in reliably across the rated range, and the built-in 1 NC auxiliary contact gives you a feedback signal for the logic controller or a holding circuit.
The AC-3 rating is 12 A at ≤440 V for motor starting. The AC-4 rating covers inching and plugging duty. The 690 V AC rated operational voltage applies to resistive loads. The IP20 enclosure allows panel-mount without additional shrouding.
At 57 mm deep, 90 mm wide, and 58 mm high, the LC2K12013P7 clips onto a DIN rail. The preassembled reversing busbar saves wiring time.