Skip to main content
Log in
Schneider Electric LC2K1201FE7 — Contactors

Schneider TeSys K LC2K1201FE7 Reversing Contactor, 3P, 12 A,

MPNLC2K1201FE7
Obsolete

Schneider TeSys K reversing contactor, 3P, AC-3 <= 440 V 12 A, 1 NC, 115 V AC coil, preassembled with reversing power busbar.

Schneider Electric LC2K1201FE7 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

LC2K1201FE7 — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationMotor control Resistive load
LC2K1201FE7 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-3 AC-1 AC-4
LC2K1201FE7 — Contacts & Poles
ParameterValue
Pole configuration3P
LC2K1201FE7 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LC2K1201FE7 — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

The 115 V AC coil pulls in cleanly; the built-in 1 NC auxiliary gives you a feedback contact for status or interlock.

AC-1 (resistive) and AC-4 (inching/plugging) ratings are also listed, so it covers both continuous resistive loads and high-stress motor reversing cycles. IP20 finger protection per VDE 0106 means it's safe for open-panel mounting but not for washdown environments — keep it inside a cabinet.

The preassembled reversing busbar saves panel space and wiring time compared to building the reversing circuit from two separate contactors and external bus work. Flame retardance meets UL 94 V1 and NF F 16-101/102, so it passes rail and industrial fire-safety requirements.

Frequently asked questions

What are the key ratings for the LC2K1201FE7?

It is a 3-pole reversing contactor rated AC-3 at 12 A up to 440 V, with a 115 V AC coil and one NC auxiliary contact. The power circuit is rated for 690 V AC 50/60 Hz. Operating temperature range is -25 to 50 °C.

What compliance documentation is available for this part?

The contactor carries IP20 finger protection per VDE 0106, flame retardance to UL 94 V1 and NF F 16-101/102, and shock/vibration robustness per IEC 60068-2-27 and IEC 60068-2-6. Protective treatment conforms to IEC 60068 and DIN 50016.

MPN
LC2K1201FE7