Schneider Electric TeSys K reversing contactor, 3P, AC-3 ≤440 V 16 A, 1 NC, 400-415 V AC coil, IP20.
| Parameter | Value |
|---|---|
| Product / component type | Reversing contactor |
| Series / range | TeSys |
| Application | Motor control |
| Parameter | Value |
|---|---|
| Rated operational voltage (Ue) | Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit |
| Utilisation category | AC-3 AC-4 |
| Parameter | Value |
|---|---|
| Pole configuration | 3P |
| Parameter | Value |
|---|---|
| IP degree of protection | IP20 conforming to VDE 0106 |
| Operating altitude | 2000 m without derating |
| Mechanical robustness | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 |
| Protective treatment / pollution degree | TC conforming to IEC 60068 TC conforming to DIN 50016 |
| Flame retardance | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 |
| Parameter | Value |
|---|---|
| Width | 90 mm |
| Height | 58 mm |
| Depth | 57 mm |
It is rated for AC-3 and AC-4 utilisation categories, meaning it is built for switching squirrel-cage motors under starting and plugging/inching duty.
It is a DIN-rail mountable contactor; the preassembled reversing busbar means no additional wiring between the two contactor halves. The IP20 finger-safe terminals accept standard screw-clamp wiring.
There is no official pin-compatible direct replacement listed. The TeSys D series is the current-generation equivalent; a parametric search matching the coil voltage (400-415 V AC), pole count (3P), and AC-3 current rating (16 A) will identify a suitable substitute. Contact us with your application details for a cross-reference quote.
The depth is 57 mm.
It is part of the Schneider Electric TeSys K range.
The contactor carries V1 flame retardance per UL 94, and meets NF F 16-101/102 requirements. IP20 protection is per VDE 0106. The protective treatment conforms to IEC 60068 and DIN 50016. The evidence does not list RoHS or REACH statements for this specific order code.
No related articles