Skip to main content
Log in
Schneider Electric LC2K1610FC7 — Contactors

Schneider TeSys K LC2K1610FC7 Reversing Contactor, 16 A, 127

MPNLC2K1610FC7
Active

Schneider Electric TeSys K reversing contactor, 3P, AC-3 <= 440 V 16 A, 1 NO, 127 V AC coil.

Schneider Electric LC2K1610FC7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LC2K1610FC7 — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationMotor control
LC2K1610FC7 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-3 AC-4
LC2K1610FC7 — Contacts & Poles
ParameterValue
Pole configuration3P
LC2K1610FC7 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LC2K1610FC7 — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

It's rated for AC-3 and AC-4 duty, meaning it's built for starting and plug-reversing squirrel-cage motors — the AC-3 figure of 16 A at 440 V is the one that governs motor switching, not the resistive AC-1 rating. The coil pulls in at 127 V AC, which is common in North American control transformers stepping down from 480 V.

Fit and integration notes

It measures 90 mm wide by 58 mm high by 57 mm deep — that 57 mm depth is the dimension to watch when you're laying out the DIN rail against the gland plate or a shallow enclosure door. It's rated for -25 to 50 °C ambient operation, which covers most indoor panel conditions but not a hot rooftop cabinet in direct sun.

Frequently asked questions

What is the AC-3 motor rating?

It's rated 16 A at 440 V in AC-3 duty, which covers starting and stopping squirrel-cage motors up to that current. The same contactor also carries an AC-4 rating for plug-reversing and inching applications.

What is the coil voltage?

The coil is 127 V AC, 50/60 Hz — a common control voltage derived from a 480 V-to-127 V control transformer.

What compliance documentation is available?

The housing is UL 94 V-1 flame rated and also complies with NF F 16-101 and NF F 16-122 for rail applications. IP20 per VDE 0106. Protective treatment meets IEC 60068 and DIN 50016.

MPN
LC2K1610FC7