Schneider Electric TeSys LC4-D series DOL starter, LC4D50M7, 50 A rated operational current, coil 220 V AC 50/60 Hz, plate-mounted, active production.
| Parameter | Value |
|---|---|
| Width | 281 mm |
| Height | 143 mm |
| Depth | 130 mm |
| Parameter | Value |
|---|---|
| Motor power | 15 kW at 220...230 V AC 50/60 Hz 22 kW at 380...400 V AC 50/60 Hz 25 kW at 415 V AC 50/60 Hz 30 kW at 440 V AC 50/60 Hz 30 kW at 500 V AC 50/60 Hz 33 kW at 660...690 V AC 50/60 Hz |
| Mounting support | Plate |
| Range of product | TeSys |
| Device short name | LC4 |
| Device composition | Contactor Fuse disconnector |
| Utilisation category | AC-3 |
| Product or component type | DOL starter |
| [Ie] rated operational current | 50 A |
| [Ue] rated operational voltage | 220 V AC 50/60 Hz |
Motor power capability spans voltage: 15 kW at 230 V, 22 kW at 400 V, 25 kW at 415 V, 30 kW at 440 V and 500 V, and 33 kW at 690 V — all at 50/60 Hz.
Mounts to a plate — not a DIN rail — so plan for a drilled backplate or sub-panel; the footprint is 281 mm wide by 143 mm tall by 130 mm deep. That 130 mm depth means the unit projects well forward of the mounting surface; leave clearance for incoming cable glands and the fuse-disconnector handle swing.
Yes, the LC4D50M7 is rated for 15 kW at 220…230 V AC 50/60 Hz in AC-3 duty, which directly covers a 15 kW motor at 230 V.
No, the LC4D50M7 is a DOL starter that combines a contactor and a fuse-disconnector only; it does not include an overload relay. Overload protection must be added separately.
The difference is the coil voltage: the LC4D50M7 has a 220 V AC coil, while the LC4D50M6 uses a different coil voltage. All other ratings (50 A, AC-3, motor power table, plate mounting) are identical.