The Schneider Electric LE3D09N7 is an enclosed star-delta starter from the TeSys LE range, rated for 9 A in AC-3 duty (switching motor loads up to that current) and a 415 V AC 50/60 Hz control coil. It's built for standard industrial environments — the IP65 enclosure (conforming to IEC 60529) keeps out dust and low-pressure water jets, so it's suited for washdown areas or outdoor cabinets where moisture is a concern. The polycarbonate housing carries an IK07 impact rating, meaning it'll take a light bump from a tool without cracking. Motor power capability spans 4 kW at 220 V AC up to 7.5 kW at 380/400 V, 415 V, or 440 V AC — all 50/60 Hz. That covers a common sweet spot for small pump, fan, or conveyor motors you'd find in a small shop or a packaged machine. The unit is a complete enclosed assembly with screw-clamp terminals on both power and control circuits, and it's designed to work with a separately ordered thermal overload relay. It also accommodates star-delta contactors and a mechanical interlock — so you're not locked into a single configuration.
The enclosure measures 348 mm high, 186 mm wide, and 175.5 mm deep — a fairly compact footprint for an enclosed starter. Cable entry is generous: eight knockouts on top and eight on the bottom, ranging from ISO20 to ISO40, so you can land power and control cables without drilling. The screw-clamp terminals accept standard wire sizes for both power and control circuits, which keeps panel wiring straightforward.