The Schneider Electric LE4D09M7 is an enclosed direct-on-line (DOL) starter from the TeSys LE range, built for standard motor-starting duty in industrial control panels. It integrates a contactor, fuse disconnector, and push-button controls (green start, red stop/reset) in a single IP65 polycarbonate enclosure — ready for wall-mount or machine-side installation without a separate panel enclosure. Rated at 9 A conventional free-air thermal current (Ith) and listed to IEC 60947-4-1, it handles AC-3 motor loads up to 4 kW at 380–440 V AC and 2.2 kW at 220/230 V AC.
If you are evaluating a substitute, the TeSys LE range includes enclosed DOL starters with similar form factor and IP65 rating, but the control voltage and thermal rating must match your application. The absence of an official successor means any cross-reference requires verifying the coil voltage (220 V AC), the Ith rating (9 A), and the enclosure cutout dimensions against the available alternatives.
Integration notes
Cable entries are provided on both top and bottom faces, accepting ISO20, ISO25, ISO32, and ISO40 gland sizes (two per size per face), which gives flexibility for incoming supply and outgoing motor cables without drilling. IP65 and IK07 protection ratings mean the enclosure is dust-tight and protected against low-pressure water jets and 2 J impact — suitable for washdown areas or outdoor installation where a standard panel would need a separate enclosure.