The LE4D09P7 is an enclosed direct-on-line (DOL) starter from the Schneider TeSys LE range, built for standard motor starting duty. It integrates a contactor, fuse carrier, and two pushbuttons (green start, red stop/reset) in a single IP65 polycarbonate enclosure rated IK07 for impact resistance.
The 9 A Ith rating defines the continuous current the starter can carry in free air. For motor starting, the AC-3 rating governs switching of squirrel-cage motors during start-up and while running — this is the duty cycle that matters for a DOL starter. The IK07 impact rating confirms the polycarbonate housing withstands a 2 J impact, typical for industrial enclosures.
Integration notes
The starter is delivered as a complete assembly — the contactor (LC1D series), fuse carrier, and pushbuttons are factory-wired inside the IP65 enclosure. Cable entries are provided on top and bottom (ISO 20, 25, 32, and 40 mm knockouts), giving flexibility for conduit or gland entry. The thermal overload relay is ordered separately and must be added to complete the motor protection. The associated fuse rating for short-circuit protection is 12 A aM (10 x 38 mm).