The LE4D25M7 is an enclosed direct-on-line (DOL) starter from the Schneider TeSys LE range, combining a contactor and fuse disconnector in a single polycarbonate enclosure. The 220 V AC control coil at 50/60 Hz is built in. Motor power capability spans 5.5 kW at 220/230 V up to 15 kW at 500 V, with the common 400 V rating at 11 kW. The IP65 enclosure (IK07 impact rating) means it's suited for washdown or dusty environments where the starter must live near the motor rather than in a clean panel.
Designed and tested to IEC 60947-4-1, the standard for contactors and motor-starters. The IP65 and IK07 ratings are per IEC 60529. The associated fuse recommendation is a 25 A aM (10 x 38 mm) type. The polycarbonate enclosure resists corrosion and impact in industrial environments. No UL or CSA listing is stated in the available record, so verify local code acceptance if the installation requires those marks.