It's built for standard industrial motor control applications where you need a ready-to-mount solution that keeps the panel builder's wiring to a minimum. Rated for AC-3 utilisation category (the standard for squirrel-cage motor starting and switching off during running), it handles motor loads up to 15 kW at 380/400 V AC and 18.5 kW at 500 V or 660/690 V AC.
Cable entries are provided top and bottom: two each for ISO20, ISO25, ISO32, and ISO40 fittings, giving flexibility for different gland sizes depending on your cable armour and conductor cross-section. The associated fuse recommendation is 32 A, 14 x 51 mm aM type — this is the short-circuit protection coordination the starter is designed around. The aM (motor-circuit) fuse characteristic allows motor inrush without nuisance blowing while still clearing faults. If your installation uses a different fuse type or size, coordination may not hold at the listed SCCR.
Compliance documentation is standard for a Schneider industrial control product: IEC 60947-4-1 is the governing standard for contactors and motor-starters. The IP and IK ratings are tested per IEC 60529. No RoHS or REACH declarations are in the immediate spec record, but as an active European-sourced product it will carry those declarations — request them with your RFQ if your quality system needs them on file.