Skip to main content
Schneider Electric LG1D182M720

TeSys LG1D182M720 Enclosed DOL Starter, 13-18 A, 220 V AC

MPN LG1D182M720
Active

Schneider Electric TeSys LG enclosed DOL starter, LG1D182M720, 13-18 A thermal protection, 220 V AC 50/60 Hz coil, IP55, AC-3 utilisation category.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LG1D182M720 specifications
ParameterValue
Main product or component typeEnclosed DOL starter
Coil voltage220 V AC 50/60 Hz
Utilization categoryAC-3
IP ratingIP55
Depth165 mm
Width175 mm
Height165 mm
MaterialPolycarbonate
ApplicationSafety
Thermal protection adjustment range13–18 A

Product details

The Schneider Electric TeSys LG1D182M720 is an enclosed direct-on-line (DOL) starter that integrates a contactor, switch disconnector, and circuit-breaker into one IP55 polycarbonate enclosure — a single assembly for motor starting and protection in a safe, guarded package. Rated for AC-3 duty, it handles 4 kW at 220/230 V AC, 7.5 kW at 400/415 V AC, and 9 kW at 440 V AC — covering the common three-phase motor sizes for pumps, fans, and small conveyors on 50/60 Hz mains. The thermal protection adjustment range of 13-18 A lets you dial in the overload setting to match the motor full-load current, protecting against sustained overcurrent without nuisance tripping.

Controls and safety integration

The front panel carries a white push-button start (I), a black push-button stop (O), and a red rotary-handle emergency stop — a complete operator station integrated into the starter body, saving panel space and wiring. With a safety application designation and compliance to IEC 60204-1 (machinery safety) and IEC 60947-4-1 (contactors and motor-starters), this unit is suited for guarding circuits where an E-stop and local control are required at the machine. The IP55 enclosure and IK07 impact resistance mean it can be mounted directly on the machine frame in washdown or dusty environments — no separate panel cabinet needed.

Dimensions and cable entry

Cable entries: four knockouts on top (two Pg 13 + two Pg 16) and four on the bottom (same pattern), giving flexibility for top/bottom cable routing without drilling.

MPN
LG1D182M720