The LG1K065M708 is an enclosed direct-on-line (DOL) starter from the TeSys LG range, combining a contactor, circuit-breaker, switch disconnector, and rotary emergency stop in a single IP55 polycarbonate enclosure. It's wired for a 220/230 V AC control circuit and thermally adjustable from 2.5 to 4 A, covering a 0.75 kW motor at 230 V or 1.5 kW at 400 V three-phase.
Four cable entries — two Pg 13 and two Pg 16 on top, same on bottom — give you room for supply, motor, and control wiring without fighting for space. The 165 mm depth and 175 mm width fit a standard panel footprint; the polycarbonate body takes IK07 impact, so it survives a bump from a ladder or tool. IP55 means it's sealed against dust jets and low-pressure water spray — fine for a washdown area or a dusty enclosure, but don't submerge it. The rotary handle emergency stop is red, with white start and black stop pushbuttons; that's a clean operator interface for a standalone machine.
It's a standard TeSys LG catalog item, so documentation and spares are straightforward.
Rated AC-3 utilisation category, so it's built for the inrush of a squirrel-cage motor start, not just resistive loads. The thermal adjustment range of 2.5 to 4 A lets you dial in protection for the actual motor FLA — no guesswork. Standards IEC 60204-1 (machinery safety) and IEC 60947-4-1 (contactors and motor-starters) cover the compliance basis for most industrial panels.