Skip to main content
Log in
Schneider Electric LG1K065P702 — Motor Starters

TeSys LG1K065P702 Enclosed DOL Starter, 0.16-0.25 A

MPNLG1K065P702
Obsolete

Schneider Electric TeSys LG series, LG1K065P702, enclosed DOL starter, 0.16…0.25 A thermal protection, 230 V AC 50/60 Hz coil, IP55, IK07, obsolete.

Schneider Electric LG1K065P702 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LG1K065P702 — Mechanical & Connection
ParameterValue
Width175 mm
Height165 mm
Depth165 mm

Product details

The LG1K065P702 is a TeSys LG enclosed direct-on-line starter from Schneider Electric. It combines a contactor, switch disconnector, and circuit-breaker in one IP55-rated polycarbonate enclosure, with a thermal protection adjustment range of 0.16…0.25 A and a 230 V AC 50/60 Hz control coil. The unit is rated for AC-3 utilization category and complies with IEC 60204-1 and IEC 60947-4-1. It is now classified as obsolete by the manufacturer.

The 0.16…0.25 A thermal protection range and 0.06 kW motor power rating at 400/415 V AC tell you this starter is sized for fractional-horsepower motors — think small fans, pumps, or conveyor drives. The AC-3 category means it's designed for starting squirrel-cage motors and switching them off while running, not for resistive loads. The IP55 enclosure with IK07 impact resistance makes it suitable for washdown areas or outdoor installations where the starter is mounted directly on the machine frame rather than in a separate panel. The 230 V AC coil is standard for European control circuits; if your line uses 24 V DC or 400 V control, this unit won't drop in.

Integration notes

The enclosure measures 165 mm deep, 175 mm wide, and 165 mm tall, with cable entries for Pg 13 and Pg 16 glands at both top and bottom. The polycarbonate housing is lightweight and can be surface-mounted directly on the machine or a bracket. The control interface includes a white push-button for start, a black push-button for stop, and a red rotary handle for emergency stop — all labeled and ready to wire into a safety circuit. The thermal overload adjustment range is set via a dial inside the enclosure; make sure the motor full-load current falls within 0.16…0.25 A before installing.

Frequently asked questions

What is the replacement for LG1K065P702?

There is no official successor order code listed for the LG1K065P702. For a new design or replacement, you will need to select a current TeSys enclosed DOL starter with a 0.16…0.25 A thermal range and 230 V AC coil. Check the physical dimensions and cable entry layout, as the new unit may differ in footprint or gland positions.

What are the specifications of LG1K065P702?

The LG1K065P702 is a TeSys LG enclosed DOL starter with a thermal protection range of 0.16…0.25 A, motor power 0.06 kW at 400/415 V AC, control voltage 230 V AC 50/60 Hz, AC-3 utilization category, IP55 and IK07 protection, and dimensions 165 x 175 x 165 mm (D x W x H). It includes a contactor, switch disconnector, and circuit-breaker in a polycarbonate enclosure.

Where can I buy LG1K065P702?

The LG1K065P702 is obsolete, but we can source it to order through our independent distribution network. Submit an RFQ for current availability and pricing — we confirm both at quote time.

Is LG1K065P702 compatible with TeSys?

Yes, the LG1K065P702 is part of the Schneider TeSys LG series. It is designed to work within the TeSys ecosystem of contactors, overloads, and enclosures. For a direct replacement, verify the thermal range and coil voltage match your existing setup.

What is a DOL starter?

A direct-on-line (DOL) starter connects the motor directly to the supply voltage, providing full voltage starting. It typically combines a contactor for switching, an overload relay for thermal protection, and sometimes a disconnector. The LG1K065P702 is an enclosed DOL starter that integrates all three functions in one IP55-rated box.

MPN
LG1K065P702