The Schneider Electric TeSys LG1K065Q702 is an enclosed direct-on-line (DOL) starter from the TeSys LG family, combining a contactor, switch disconnector, and circuit-breaker in one IP55 polycarbonate enclosure. It's rated for AC-3 duty at 0.06 kW on 400/415 V or 440 V supplies, with a thermal protection adjustment range of 0.16...0.25 A. The control circuit runs on 380/400 V AC, and the front panel carries a white push-button start, black push-button stop, and a red rotary emergency stop handle.
The 0.16...0.25 A thermal protection range sets the motor full-load current this starter can protect — it's sized for very small motors, fractional-horsepower loads like a small fan or pump. IP55 and IK07 mean the enclosure handles dust ingress, water jets, and mechanical impact up to 1 joule — suitable for washdown areas or light industrial floors where the starter is mounted directly on the machine frame rather than in a sealed cabinet. The 380/400 V AC coil voltage is non-standard for 24 VDC control schemes; verify your control circuit voltage matches before specifying.
Designed to IEC 60947-4-1 (low-voltage switchgear and controlgear for motor starters) and IEC 60204-1 (safety of machinery — electrical equipment). The standards cover the interrupting capacity, coordination, and safety isolation requirements for a DOL starter in a machine-tool or industrial-process environment.