The Schneider TeSys LG1K065Q706A37 is an enclosed direct-on-line starter combining a contactor, switch disconnector, and circuit-breaker in one IP55 polycarbonate enclosure. It provides motor starting and protection for a 0.25 kW motor at 220/230 V AC or a 0.55 kW motor at 400/415 V AC, with a thermal protection adjustment range of 1 to 1.6 A.
The thermal protection adjustment range of 1 to 1.6 A sets the overload relay trip point — this starter is sized for fractional-horsepower motors drawing up to 1.6 A full-load current. The AC-3 utilisation category means it is rated for starting squirrel-cage motors and disconnecting them under running conditions, not for resistive loads. The 380/400 V AC coil voltage is a specific control voltage — verify your control transformer or panel supply matches before specifying. The unit complies with IEC 60947-4-1 (motor starters) and IEC 60204-1 (electrical equipment of machines).
Dimensions and enclosure details
The enclosure measures 175 mm wide by 165 mm high by 165 mm deep, made of polycarbonate with IK07 impact resistance. Cable entries include four knockouts: two Pg 13 and two Pg 16 on both top and bottom faces, giving flexibility for conduit or gland routing in the panel.