The TeSys LG1K095M714 is an enclosed direct-on-line (DOL) starter from the TeSys LG range, integrating a contactor, switch disconnector, and circuit-breaker in a single IP55 polycarbonate enclosure rated IK07. Rated for 4 kW motor loads at 400/415 V AC 50/60 Hz (AC-3 utilisation category), it includes a thermal protection adjustment range of 6...10 A and a 220/230 V AC control circuit coil. The front panel carries a white push-button start, a black push-button stop, and a red rotary emergency stop handle — a self-contained safety solution for a single motor branch.
The LG1K095M714 is classified as obsolete by the manufacturer.
The 4 kW rating at 400/415 V AC in AC-3 duty means this starter switches standard three-phase squirrel-cage induction motors up to that power — the AC-3 category covers starting and switching off running motors, not resistive loads. The thermal protection adjustment range of 6...10 A sets the overload relay trip point; set it to the motor's full-load current, not the starter's maximum, to avoid nuisance tripping or inadequate protection. IP55 and IK07 mean the enclosure is dust-protected and withstands water jets from any direction plus 0.5 J impact — suitable for washdown areas or outdoor installation where hose-down cleaning is routine. Dimensions of 165 mm depth, 175 mm width, and 165 mm height (polycarbonate) determine the gland-plate layout and DIN-rail or back-panel footprint; the cable entries (4 x Pg13 + 2 x Pg16 top and bottom) dictate conduit or cable-gland sizing.