The Schneider Electric LG1K095M714A37 is an enclosed direct-on-line (DOL) starter from the TeSys LG range, combining a contactor, switch disconnector, and circuit-breaker in a single IP55 polycarbonate enclosure rated IK07 for impact resistance. It is designed for safety applications and complies with IEC 60947-4-1 and IEC 60204-1. Rated for AC-3 utilization category, it delivers 4 kW at 400/415 V AC and 1.5 kW at 220/230 V AC, 50/60 Hz. The thermal protection adjustment range is 6...10 A, and the control circuit voltage is 220/230 V AC 50/60 Hz. The enclosure includes push-button start (white I), push-button stop (black O), and a rotary handle emergency stop (red) plus a mushroom head push-button emergency stop (red). Cable entries accommodate 4 entries: 2 Pg 13 + 2 Pg 16 at both top and bottom.
The 6...10 A thermal protection range means the overload relay inside is set for motors drawing between roughly 3 and 5 kW at 400 V — the 4 kW rating at 400/415 V sits right in the middle of that band. The AC-3 rating confirms it handles starting currents of squirrel-cage motors (typically 6-8x FLA) without welding the contactor tips. IP55 means the enclosure is dust-protected and resists water jets from any direction — suitable for washdown areas or outdoor installation under cover. The polycarbonate material with IK07 impact resistance handles light mechanical shocks (2 Joules) common in industrial environments. Dimensions of 175 mm wide × 165 mm high × 165 mm deep fit a standard small enclosure footprint; the four cable entries (two Pg 13 and two Pg 16 at top and bottom) give flexibility for incoming supply and outgoing motor cables.