The enclosure is polycarbonate, rated IP55 against dust and water jets, and IK07 against mechanical impact — suitable for installation in industrial environments where washdown or light impact is a concern. The unit comes as a pre-wired assembly: a circuit breaker (ordered separately), a contactor, and a switch disconnector inside the same box. Control is via push-button start (white I), push-button stop (black O), and a rotary-handle emergency stop (red). Cable entries are 4 knockouts — 2 Pg 13 and 2 Pg 16 on top, same on bottom — giving flexibility for incoming and outgoing wiring.
This part is listed as obsolete by the manufacturer. If you need a drop-in replacement from the same family, the closest sibling is the LG1K095Q6, which shares the same 9 A AC-3 rating and enclosure but uses a different coil voltage; verify coil compatibility before substituting.
The starter is designed to IEC 60947-4-1 (low-voltage switchgear and controlgear for motor starters) and IEC 60204-1 (safety of machinery — electrical equipment). These are the standards that govern its breaking capacity, coordination, and protective bonding. The IP55 and IK07 ratings are also certified to IEC 60529 and IEC 60529 respectively.