The Schneider Electric TeSys LG7K06B708 is an enclosed direct-on-line (DOL) starter combining a contactor and circuit-breaker in a single IP55 polycarbonate enclosure, rated for safety applications per IEC 60204-1 and IEC 60947-4-1. It delivers 0.75 kW at 220/230 V AC and 1.5 kW at 400/415 V AC or 440 V AC, all at 50/60 Hz, in AC-3 duty — the standard category for starting squirrel-cage motors and switching them off during running. The thermal protection adjustment range of 2.5...4 A covers small motor loads such as pumps, fans, and conveyors in a panel-mount or wall-mount enclosure.
This part is classified as obsolete by the manufacturer. For a BOM line that requires this exact form, fit, and function — IP55 enclosed DOL starter with a 24 V AC coil and 2.5...4 A thermal range — the part is sourced to order against an RFQ through independent distribution channels.
The IP55 enclosure with IK07 impact resistance means the starter withstands hose-directed water and low-energy mechanical shocks — suitable for washdown areas or light industrial environments where dust and moisture are present. The 24 V AC control coil at 50/60 Hz is a standard safety voltage for control circuits, often fed from an isolation transformer in the panel. Dimensions of 175 mm wide by 165 mm high by 177 mm deep in a polycarbonate housing allow direct wall or machine mounting without a separate enclosure. Cable entries include four knockouts: two Pg 13 and two Pg 16 at both top and bottom, simplifying conduit routing.