It is rated for AC-3 motor duty: 0.75 kW at 220/230 V AC and 1.5 kW at 400/415 V AC, with a thermal protection adjustment range of 2.5 to 4 A. The control circuit runs on 48 V AC, 50/60 Hz. The front panel has a white start push button, a black stop push button, and a red mushroom-head emergency stop, giving operators local control and a hard-wired E-stop without needing a separate station.
Standards and compliance — what they certify
This starter complies with IEC 60947-4-1 (the standard for contactors and motor-starters) and IEC 60204-1 (safety of machinery — electrical equipment). That means it is designed for the overcurrent, switching, and isolation duties a motor circuit demands, and it meets the machinery-safety requirements for emergency stop and control circuits.
Integration — what it connects to and how it mounts
Dimensions are 165 mm high, 175 mm wide, and 177 mm deep. The polycarbonate enclosure has four cable entries: two Pg 13 and two Pg 16 on the top, and the same on the bottom. That gives you multiple conduit or gland options for incoming and outgoing power and control wiring. It is an enclosed DOL starter, so it arrives as a single assembly — mount it directly to a wall, machine frame, or panel backplate. No separate enclosure or wiring of contactor to breaker is needed; the internal connections are factory-set.