The Schneider Electric TeSys LG7K06F703 is an enclosed direct-on-line (DOL) starter combining a contactor and circuit-breaker in a single IP55 polycarbonate enclosure. It's built for safety applications per IEC 60947-4-1 and IEC 60204-1, with a push-button start (white I), stop (black O), and a red mushroom-head emergency stop on the front panel. Rated for AC-3 utilisation category, it handles motor loads up to 0.12 kW at 440 V AC or 0.09 kW at 400/415 V AC. The thermal protection adjustment range is 0.25…0.4 A, so it's sized for fractional-horsepower motors — think small pumps, fans, or conveyors in a washdown or dusty environment where the IP55 rating matters.
The 0.25…0.4 A thermal adjustment range is the critical figure: this starter protects motors whose full-load current falls within that band.
The polycarbonate enclosure measures 175 mm wide, 165 mm high, and 177 mm deep. Cable entries are provided: four Pg 13 and two Pg 16 knockouts on both top and bottom faces. The front panel carries the start, stop, and emergency-stop push buttons — no additional pilot devices needed for basic local control.