The Schneider Electric TeSys LG7K06M703A04 is an enclosed direct-on-line starter from the TeSys LG family, combining a contactor and circuit-breaker in a single IP55 polycarbonate enclosure. It's a ready-to-mount motor-starting package for small loads — the thermal protection adjustment range of 0.25…0.4 A and AC-3 utilisation category tell you it's sized for fractional-horsepower motors, not general switching. Rated motor power is 0.06 kW at 220/230 V AC 50/60 Hz and 0.09 kW at 400/415 V AC 50/60 Hz, with a 220/230 V AC control coil. That 0.06 kW at the lower voltage is the number to match against your motor nameplate — the starter's thermal overload relay covers that band directly, no separate heater pack to order.
Designed to IEC 60947-4-1 (the standard for contactors and motor-starters) and IEC 60204-1 (safety of machinery — electrical equipment). The IP55 rating means the enclosure is dust-protected and hose-down resistant, suitable for washdown or outdoor installation within the limits of the polycarbonate material. Device application is marked as Safety, with a mushroom-head push-button emergency stop red control type. That's the red button on the enclosure — it's a local E-stop, not a remote-signal device. The device composition (contactor plus circuit-breaker) gives you both switching and short-circuit protection in one box.