The Schneider LG7K06M705 is an enclosed direct-on-line starter from the TeSys LG range, combining a contactor and circuit-breaker in a single IP55 polycarbonate enclosure ready for wall-mounting without a separate panel. Rated for AC-3 motor switching duty, it covers small three-phase motors from 0.12 kW at 220/230 V AC up to 0.37 kW at 440 V AC, with a thermal overload adjustment range of 0.63 to 1 A.
This part is classified as obsolete by the manufacturer.
Enclosure and environmental fit
The polycarbonate enclosure measures 177 mm deep by 175 mm wide by 165 mm high, with cable entries sized for Pg 13 and Pg 16 glands at both top and bottom. Rated IP55 and IK07, it handles hose-directed water and low-energy impacts — suitable for washdown areas or light industrial environments where a separate panel is not justified. The unit complies with IEC 60947-4-1 (motor starters) and IEC 60204-1 (machinery electrical safety), so it fits into a CE-marked machine control circuit without additional coordination studies for the starter itself.