The Schneider TeSys LG7K06M707 is an enclosed direct-on-line (DOL) starter — a self-contained motor-starting package that combines a contactor, a circuit-breaker with thermal overload protection, and control devices in a single IP55 polycarbonate enclosure. It's built for AC-3 duty (squirrel-cage motors) and carries safety as its primary application, per the IEC 60947-4-1 and IEC 60204-1 standards it's certified to. The thermal protection adjustment range of 1.6 to 2.5 A sets the motor full-load current window this unit protects. That maps to motor power ratings of 0.37 kW at 220/230 V AC, 0.75 kW at 400/415 V AC, and 1.1 kW at 440 V AC — all 50/60 Hz. The coil pulls 220/230 V AC at line frequency, so it's a straight line-voltage control scheme, no separate control transformer needed for that voltage.
Where it goes and what it replaces on a line
This is a drop-in motor starter for a single machine or a small conveyor section where you want the contactor, overload, and disconnect in one box with local controls. The IP55 rating means it's fine for indoor industrial environments with dust and hose-down — think washdown areas in food processing, packaging lines, or machine tools near coolant mist. It is not rated for direct outdoor exposure (no UV stabilisation stated, and IP55 is splash-proof, not submersible). The polycarbonate body is lighter than a steel enclosure of the same size, which matters if you're mounting it on a moving arm or a gantry.