The TeSys LG7K06M707A29 is an enclosed direct-on-line (DOL) starter from the TeSys LG family, combining a contactor, circuit-breaker, and padlocking device in one IP55 polycarbonate enclosure. Rated for AC-3 motor switching, it delivers 0.37 kW at 220/230 V AC and 0.75 kW at 400/415 V AC, with a thermal protection adjustment range of 1.6 to 2.5 A.
This part is officially obsolete per the manufacturer's lifecycle status. No direct manufacturer replacement order code is listed, so sourcing relies on surplus or broker channels.
The AC-3 utilisation category means this starter is rated for starting and stopping squirrel-cage motors under full load — the 0.75 kW at 400 V is the real-world motor rating, not a resistive load figure. The 1.6 to 2.5 A thermal protection range sets the overload relay trip band; match it to the motor full-load current, not the contactor rating. IP55 and IK07 protection means the enclosure handles hose-directed water and impacts — suitable for washdown areas or light industrial floors, not submersion. Compliance with IEC 60204-1 (safety of machinery) and IEC 60947-4-1 (contactors and motor-starters) confirms it meets the two key standards for industrial motor control panels.
The enclosure measures 177 mm deep, 175 mm wide, and 165 mm high — a compact footprint for a combined starter with padlocking. Cable entries include four knockouts: two Pg 13 and two Pg 16 on both top and bottom, giving flexibility for incoming supply and motor leads.