The Schneider Electric TeSys LG LG7K06N702 is an enclosed direct-on-line (DOL) starter combining a contactor and circuit-breaker in one IP55 polycarbonate enclosure. It provides motor starting and thermal overload protection for small motors rated 0.06 kW at 400/415 V AC, with a thermal protection adjustment range of 0.16-0.25 A. Rated for AC-3 utilisation category per IEC 60947-4-1 and compliant with IEC 60204-1, this starter is designed for standard-environment safety applications. The IP55 enclosure and IK07 impact rating make it suitable for washdown or dusty industrial floors where the starter is mounted directly on the machine frame rather than in a sealed cabinet.
The LG7K06N702 is marked obsolete by Schneider Electric. Because this is an enclosed starter with a specific thermal range (0.16-0.25 A) and 400/415 V AC coil, a direct drop-in replacement from the current TeSys range would need to match the enclosure cutout, gland configuration, and control voltage. The cable entry pattern — 4 entries, 2 Pg 13 + 2 Pg 16 at both top and bottom — is a mechanical constraint that any substitute must match.
Integration notes
The enclosure measures 175 mm wide × 165 mm high × 177 mm deep. Four cable entries (two Pg 13, two Pg 16) at both top and bottom allow top-entry power and bottom-entry control wiring, or vice versa. The polycarbonate body is IK07-rated against mechanical impact — adequate for machine-side mounting where occasional tool contact is possible.