It is sized for a 0.06 kW motor at 400/415 V or 440 V AC (50/60 Hz) and carries a thermal protection adjustment range of 0.16 to 0.25 A. Rated AC-3 per IEC 60947-4-1 and built to IEC 60204-1, this starter is intended for standard-environment safety circuits where a push-button start/stop and a red mushroom-head emergency stop are needed on the enclosure face.
Enclosure, protection, and wiring
The polycarbonate enclosure measures 165 mm high, 175 mm wide, and 177 mm deep, with four cable entries — two Pg 13 and two Pg 16 at both top and bottom. IP55 keeps dust and hose-directed water out; IK07 resists impact energy of 2 J, enough for accidental tool strikes in a panel or on a machine frame. The 230 V AC control circuit coil is wired internally; the unit ships as a functional assembly, not a kit. No separate contactor or overload relay to mount and interconnect — one incoming supply cable and one motor cable, and the local controls are on the lid.