Skip to main content
Log in
Schneider Electric LG7K06P703 — Motor Starters

Schneider TeSys LG7K06P703 Enclosed DOL Starter, 0.25-0.40A

MPNLG7K06P703
Obsolete

Schneider Electric TeSys LG enclosed DOL starter, LG7K06P703, 0.25…0.40 A thermal protection, 230 V AC 50/60 Hz coil, IP55 polycarbonate enclosure.

Schneider Electric LG7K06P703 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LG7K06P703 — Mechanical & Connection
ParameterValue
Width175 mm
Height165 mm
Depth177 mm

Product details

The Schneider Electric TeSys LG7K06P703 is an enclosed direct-on-line (DOL) starter combining a contactor and a circuit-breaker in one IP55 polycarbonate enclosure. It is designed for safety applications per IEC 60947-4-1 and IEC 60204-1, providing motor starting and thermal overload protection in a single package. The thermal protection adjustment range is 0.25…0.4 A, which sets the overload relay trip point for the connected motor. Motor power ratings are 0.06 kW at 220/230 V AC, 0.09 kW at 400/415 V AC, and 0.12 kW at 440 V AC, all at 50/60 Hz in AC-3 utilization category — meaning it switches motor loads under typical starting and running conditions.

Enclosure, protection, and wiring

Cable entries are provided: 4 entries (2 Pg 13 + 2 Pg 16) on the top and the same on the bottom, giving flexibility for incoming supply and outgoing motor cables. The control interface includes a white push-button for start, a black push-button for stop, and a red mushroom-head push-button for emergency stop — all integrated into the enclosure lid.

The LG7K06P703 is classified as obsolete by the manufacturer.

Frequently asked questions

Is LG7K06P703 obsolete?

Yes, the LG7K06P703 is classified as obsolete by Schneider Electric. No official replacement order code has been published.

What is the replacement for LG7K06P703?

No official successor order code is listed for the LG7K06P703. For a functional equivalent, review the TeSys LG series for a unit with matching thermal range (0.25…0.4 A) and 230 V AC coil voltage, or consult a sourcing specialist to cross-reference the BOM requirements.

How to wire LG7K06P703?

The LG7K06P703 has cable entries on top and bottom (2 Pg 13 + 2 Pg 16 each). The integrated controls (start, stop, emergency stop) are pre-wired to the contactor coil circuit. For motor and supply connections, follow the wiring diagram on the enclosure label or in the product datasheet.

MPN
LG7K06P703