The Schneider TeSys LG7K06P704 is an enclosed direct-on-line (DOL) starter from the TeSys LG range, combining a contactor and circuit-breaker in a single polycarbonate enclosure rated IP55. It is designed for safety applications per IEC 60947-4-1 and IEC 60204-1, with a thermal protection adjustment range of 0.4 to 0.63 A and a 230 V AC 50/60 Hz control coil. The unit is rated for AC-3 utilisation category and can switch a 0.18 kW motor at 400/415 V AC or 440 V AC, 50/60 Hz.
The LG7K06P704 is classified as obsolete by the manufacturer. No official manufacturer successor order code is listed for this exact variant; buyers should verify fit against their BOM line and request a cross-reference recommendation when submitting an RFQ.
The 0.4 to 0.63 A thermal protection range sets the motor full-load current window — this starter is sized for the smallest fractional-horsepower motors, not general-purpose 1 A+ loads. IP55 means the enclosure is dust-protected and withstands water jets from any direction, making it suitable for washdown areas or outdoor installation under cover. The cable entries accept 2 x Pg 13 and 2 x Pg 16 glands at both top and bottom, giving flexibility for top-entry or bottom-entry wiring in a panel or junction box.