Skip to main content
Schneider Electric LG7K06P705

TeSys LG7K06P705 Enclosed DOL Starter, 0.63...1 A, 230 V AC

MPN LG7K06P705
Obsolete

Schneider Electric TeSys LG enclosed DOL starter, order code LG7K06P705, thermal overload 0.63...1 A, 230 V AC coil, IP55 polycarbonate enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LG7K06P705 specifications
ParameterValue
Main product or component typeEnclosed DOL starter
Coil voltage230 V AC 50/60 Hz
Utilization categoryAC-3
IP ratingIP55
Depth177 mm
Width175 mm
Height165 mm
MaterialPolycarbonate
ApplicationSafety
Thermal protection adjustment range0.63–1 A

Product details

What this enclosed starter does

It's built for safety applications per IEC 60947-4-1 and IEC 60204-1, meaning it handles both motor switching and overload protection in a single enclosure. The thermal protection adjustment range of 0.63...1 A sets the trip point for the connected motor, and the AC-3 utilisation category tells you it's rated for starting squirrel-cage motors under full load.

Motor power match and control voltage

This LG7K06P705 is specced for small motors: 0.12 kW at 220/230 V AC, 0.25 kW at 400/415 V AC, and 0.37 kW at 440 V AC — all at 50/60 Hz. The control circuit runs on 230 V AC, so it's a straight swap into a standard European panel supply. The push-button controls on the lid (white start, black stop, red mushroom-head emergency stop) give you local operator control without extra wiring.

The polycarbonate enclosure measures 165 mm high, 175 mm wide, and 177 mm deep — compact enough for a machine-mount or a small panel. Cable entries are 4 knockouts: 2 Pg 13 and 2 Pg 16 on both top and bottom. The IP55 rating means it handles dust and water jets, so it's fine for washdown areas or outdoor installation under a cover. IK07 impact resistance (IEC 60529) adds a bit of toughness against accidental bumps on the route.

MPN
LG7K06P705