The Schneider Electric TeSys LG7K06Q702 is an enclosed direct-on-line (DOL) starter from the TeSys LG family, combining a contactor and a circuit-breaker in a single IP55 polycarbonate enclosure. It is a safety-rated starter, meaning it includes an emergency-stop mushroom-head pushbutton alongside start (white I) and stop (black O) pushbuttons, and is designed to meet IEC 60204-1 and IEC 60947-4-1 for machine safety circuits. The thermal protection adjustment range spans 0.16 to 0.25 A, and the motor power rating is 0.06 kW at 400/415 V AC (also 0.06 kW at 440 V AC). The control circuit voltage is 380/400 V AC at 50/60 Hz, so this unit is wired for a 400 V line, not a 230 V control transformer.
The 0.16–0.25 A thermal adjustment range governs the motor overload protection — set it to match the full-load current of the connected motor. At 0.06 kW (roughly 1/12 HP) on a 400 V supply, this starter is sized for fractional-horsepower loads: small pumps, fans, or conveyor drives in a safety-monitored circuit. Cable entry is generous: four entries on top and four on bottom, each accepting Pg 13 or Pg 16 glands (two of each per side). That gives flexibility for incoming supply, motor leads, and control wiring without crowding the enclosure.