The TeSys LG LG7K06Q704A29 is an enclosed direct-on-line (DOL) starter from Schneider Electric's TeSys range, combining a contactor, circuit-breaker, and padlocking device in a single IP55 polycarbonate enclosure. It's rated for AC-3 motor duty and carries a thermal protection adjustment range of 0.4...0.63 A, making it a fit for small motors up to 0.18 kW at 400/415 V AC 50/60 Hz.
The 0.4...0.63 A thermal protection adjustment range sets the motor full-load current this starter can protect — set the dial to match the nameplate FLA of the motor. The AC-3 utilisation category means it's rated for starting squirrel-cage motors under full load, not just resistive loads. The 380/400 V AC control coil matches standard European three-phase control voltages; verify your control circuit voltage matches before wiring. The push-button controls (white start, black stop, red mushroom-head emergency stop) give local operator control without opening the enclosure.
This enclosed DOL starter is designed for controlling and protecting small three-phase motors in conveyor drives, pumps, fans, and compressors where a compact, self-contained motor-starting solution is needed. The IP55 enclosure lets it mount directly on the machine frame or near the motor, not just inside a central panel. Cable entries (4 x Pg 13 + 2 x Pg 16 top and bottom) give flexibility for incoming supply and motor leads.