The Schneider Electric LG7K06Q708 is an enclosed direct-on-line (DOL) starter from the TeSys LG family — a ready-to-wire combination of a contactor and a circuit-breaker in a polycarbonate box, with a built-in emergency stop and start/stop push-buttons. It's designed for safety applications and complies with IEC 60947-4-1 and IEC 60204-1, so you're covered for motor-starting duty in a controlled environment. Rated for AC-3 utilisation, it handles 0.75 kW at 220/230 V AC, 1.5 kW at 400/415 V AC, and 1.5 kW at 440 V AC — typical for small pumps, fans, or conveyors. The thermal protection adjustment range is 2.5 to 4 A, and the control circuit voltage is 380/400 V AC 50/60 Hz.
IP55 and IK07 mean the enclosure is dust-protected and handles water jets — fine for a washdown area or a dusty panel room, but not for submersion or heavy impact. The polycarbonate shell holds up to most industrial atmospheres, though I wouldn't put it near hot bearings or direct chemical spray without checking the compatibility. Cable entry is generous: 4 knockouts plus 2 Pg13 and 2 Pg16 at both top and bottom. That gives you plenty of room for incoming power and control wiring without fighting for space. Dimensions are 177 mm deep, 175 mm wide, 165 mm high — fits a standard panel or wall-mount footprint.
We source through independent distribution channels, so lead times vary — submit an RFQ for current numbers.