The TeSys LG7K06Q710A29 is an enclosed direct-on-line starter from the TeSys LG family, combining a contactor, circuit-breaker, and padlocking device in a single IP55 polycarbonate enclosure. It is designed for safety applications per IEC 60204-1 and IEC 60947-4-1, with AC-3 utilisation category for switching three-phase induction motors. The thermal protection adjustment range of 4…6.3 A sets the overload trip point for the motor circuit — set it to match the motor's full-load current. Motor power capability: 3 kW at 440 V AC, 2.2 kW at 400/415 V AC, and 1.1 kW at 220/230 V AC — all at 50/60 Hz. The IP55 and IK07 ratings mean the enclosure handles hose-down cleaning and low-energy impacts, suitable for standard industrial environments where dust and water jets are present.
The LG7K06Q710A29 is available to quote against an RFQ through our network of independent distributors and surplus channels.
Physical integration and cable entry
The enclosure measures 177 mm deep × 175 mm wide × 165 mm high, in polycarbonate. Cable entries: four knockouts — two Pg 13 and two Pg 16 on top, and the same pattern on the bottom. This gives flexibility for top or bottom cable entry in a panel or wall-mount installation. The push-button layout is fixed: white for start (I), black for stop (O), and a red mushroom-head push-button for emergency stop. No auxiliary contact blocks are mentioned in the spec — the emergency stop is a direct mechanical switch on the enclosure face.