It carries a 3-pole power circuit rated for AC-3 duty at 6 A up to 440 V, with a 24 V DC coil. The AC-3 rating means it switches motor loads under full running current — the standard category for squirrel-cage induction motors during starting and stopping.
The 6 A AC-3 rating at 440 V defines the motor current it can handle. The 24 V DC coil is common in control panels with a DC supply rail; verify your control voltage matches before wiring.
Deployment context
As a reversing contactor, this part mounts in a control panel to switch a motor between forward and reverse rotation — common on conveyor drives, hoists, and small pump sets where direction reversal is needed. The preassembled reversing busbar simplifies wiring by mechanically interlocking the two contactors so both cannot close simultaneously, preventing a phase-to-phase short. The 90 mm width and 58 mm height fit a standard DIN-rail footprint alongside other TeSys K control gear.