Skip to main content
Log in
Schneider Electric LP2K09103BD3 — Contactors

TeSys K LP2K09103BD3 Reversing Contactor, AC-3 9A, 24V DC Co

MPNLP2K09103BD3
Obsolete

Schneider Electric TeSys K reversing contactor, LP2K09103BD3, 3P, AC-3 <=440 V 9 A, 1 NO, 24 V DC coil, IP20.

Schneider Electric LP2K09103BD3 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

LP2K09103BD3 — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationResistive load Motor control
LP2K09103BD3 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-3 AC-1 AC-4
LP2K09103BD3 — Contacts & Poles
ParameterValue
Pole configuration3P
LP2K09103BD3 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Shocks contactor opened, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on X axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LP2K09103BD3 — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

The LP2K09103BD3 is a TeSys K reversing contactor from Schneider Electric — a 3-pole device preassembled with a reversing power busbar, designed for control of small three-phase motors up to 9 A in AC-3 duty at 440 V.

Dimensions are 90 mm wide by 58 mm high by 57 mm deep — a compact block that fits standard DIN-rail enclosures. IP20 protection (fingersafe terminals) means it is intended for inside a panel, not exposed to washdown. Flame retardance is V-1 per UL 94, which meets most industrial panel fire-safety requirements.

Mechanical robustness and approvals

Rated for 15 Gn shock (closed contacts) on Z axis per IEC 60068-2-27, and vibration up to 4 Gn closed — figures that confirm it survives transport and moderate machine vibration. Protective treatment conforms to IEC 60068 and DIN 50016 for humid/aggressive environments. The utilisation categories cover AC-1 (resistive), AC-3 (motor start/run), and AC-4 (plugging/inching), so it can handle reversing duty with frequent starts.

Frequently asked questions

What is the closest pin-compatible alternative?

There is no official successor order code from the manufacturer. For a new design, a current TeSys K or TeSys Deca reversing contactor with matching pole count, coil voltage, and AC-3 current rating would be the functional path, but physical footprint and terminal layout must be verified against the panel cutout.

What is the depth of this contactor?

The listed depth is 57 mm.

What compliance documentation is available?

The part carries V-1 flame retardance per UL 94, IP20 per VDE 0106, and protective treatment per IEC 60068 and DIN 50016. RoHS/REACH compliance is standard for the TeSys K range but not explicitly listed in this record.

MPN
LP2K09103BD3