Skip to main content
Schneider Electric LV848333 — Circuit Breaker Accessories

Schneider Electric LV848333 MasterPact MTZ3 4000 A Drawout C

MPNLV848333
Active

Schneider Electric MasterPacT MTZ3, LV848333, drawout circuit breaker, 4P, 4000 A at 40 °C, H1 100 kA at 415 V AC, rear connection.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LV848333 — Identification
ParameterValue
Product / component typeCircuit breaker
Product nameMasterPact MTZ3
Product rangeMasterPacT
Device applicationPower distribution protection
LV848333 — Electrical
ParameterValue
Rated current [In]4000 A at 40 °C
Rated operational voltage [Ue]690 V AC 50/60 Hz
Rated insulation voltage [Ui]1000 V AC 50/60 Hz
Rated impulse withstand voltage [Uimp]12 kV
Poles description4P
LV848333 — Protection & Performance
ParameterValue
Rated service breaking capacity [Ics]100 kA at 220/415 V AC 50/60 Hz 100 kA at 440 V AC 50/60 Hz 100 kA at 500/525 V AC 50/60 Hz 100 kA at 660/690 V AC 50/60 Hz
Suitability for isolationYes conforming to EN/IEC 60947-2
Mechanical durability10000 cycles with periodic preventive maintenance
Electrical durabilityAC-3: 6000 cycles 440/690 V AC 50/60 Hz conforming to EN/IEC 60947-3 1500 cycles 440 V AC 50/60 Hz conforming to EN/IEC 60947-2 1500 cycles 690 V AC 50/60 Hz conforming to EN/IEC 60947-2 AC-23A: 1500 cycles 440 V AC 50/60 Hz conforming to EN/IEC 60947-3 AC-23A: 1500 cycles 690 V AC 50/60 Hz conforming to EN/IEC 60947-3
LV848333 — Mechanical
ParameterValue
Connection pitch230 mm
Downside connectionRear
Upside connectionRear
Device short nameMTZ3 40 H1
Control typePush-button
Mounting modeDrawout
Mounting supportRails Base plate
WidthDrawout circuit breaker with chassis: 1016 mm Drawout circuit breaker without chassis: 838 mm
HeightDrawout circuit breaker with chassis: 479 mm Drawout circuit breaker without chassis: 300 mm
DepthDrawout circuit breaker with chassis: 403 mm Drawout circuit breaker without chassis: 300 mm
LV848333 — Environmental
ParameterValue
IP degree of protectionIP30 conforming to EN 60529
Pollution degree3 conforming to IEC 60947-1
Operating ambient air temperature-25...70 °C
Storage ambient air temperature-40...85 °C
LV848333 — Approvals
ParameterValue
StandardsEN/IEC 60947-1 EN/IEC 60947-2 EN/IEC 60947-2 Annex H IEC 61557-12

Product details

The LV848333 is a Schneider Electric MasterPact MTZ3 drawout circuit breaker — a 4-pole, 4000 A frame for main incoming or large feeder protection. It is the H1 performance variant, delivering 100 kA Icu at 415 V AC, with the same 100 kA across the full voltage range up to 690 V AC. The drawout chassis (included) lets you rack the breaker between connected, test, and disconnected positions without pulling cables, a standard requirement for main breakers that need periodic maintenance access.

Ratings that matter for the switchboard designer

The short-time withstand current (Icw) is 100 kA for 0.5 s, 1 s, and 3 s. Category B selectivity confirms it is designed for that role. Making capacity (Icm) is 220 kA at 415 V. This is the peak asymmetrical current the breaker can close into and latch against. Maximum closing response time is 80 ms. Insulation voltage (Ui) is 1000 V AC, operational voltage (Ue) is 690 V AC, and impulse withstand (Uimp) is 12 kV.

Drawout configuration with chassis: 403 mm deep, 1016 mm wide, 479 mm high. Without chassis: 300 mm deep, 838 mm wide, 300 mm high. The 230 mm connection pitch determines bus-bar drilling on the rear-connected pads — both upside and downside connections are rear. Mounting support options are rails or base plate. Neutral position is on the right. Standard for MasterPact 4P frames; verify bus-bar phasing if your switchboard is laid out left-neutral.

These are the core IEC standards for low-voltage switchgear and controlgear. No UL or CSA listing appears in the evidence; for North American projects, verify acceptance with the local code authority.

Environmental and durability

Altitude derating applies above 2000 m — up to 5000 m with derating. Power dissipation at rated current is 600 W — that is the heat the switchgear ventilation must extract. Mechanical durability is 10,000 cycles with periodic preventive maintenance. Electrical durability varies by duty: 6000 cycles for AC-3 (motor switching) at 440/690 V, 1500 cycles for AC-23A (occasional motor switching including inching) at the same voltages.

Frequently asked questions

What is LV848333's rated current and breaking capacity?

Rated continuous current (In) is 4000 A at 40 °C. The H1 performance variant delivers 100 kA Icu/Ics across the full voltage range from 220/415 V to 660/690 V AC.

MPN
LV848333