The LV848413 is a front top connection accessory for the MasterPact MTZ2 20 drawout breaker, 3-pole. It's the piece that brings the line and load conductors to the front of the bucket, so you're not reaching behind the breaker to land lugs — a real time-saver when you're wiring up a switchboard or doing a swap on a live-front gear lineup. The 115 mm connection pitch matches the standard MTZ2 drawout cradle footprint, so it bolts directly onto the breaker's upside connection points. No adapter plate, no field modification — it's a straight mechanical fit for a 3P drawout MTZ2 20 frame.
Integration notes
Mounts on the upside of the drawout breaker — the top side when the breaker is racked into the cassette. Front accessibility means you land your conductors from the front of the panel, which keeps your hands clear of the bus bars and live parts deeper in the bucket. Standard practice for switchboard builders: land the line side first, torque to spec, then rack the breaker in. The 115 mm pitch is the center-to-center distance between phases on the connection points. If you're replacing an older MasterPact NW or NT front connection, verify that your cradle and bus stabs match this pitch — MTZ2 uses a different footprint than the previous generation.