The LX0FG008 is a replacement contactor coil for the TeSys F range — the heavy-duty contactor family rated for motor and resistive loads up to the contactor frame's rating. This is the coil only, not the full contactor assembly; it bolts into the existing TeSys F contactor base. Control circuit voltage is 220...230 V, and the coil accepts both AC (50...400 Hz) and DC supply — unusual versatility for a single coil that simplifies stocking for panels that mix control transformer and DC power supply architectures. The latching coil draws 26.27 Ω at 68 °F (20 °C); the unlatching coil measures 4729 Ω at the same temperature. Operating times are 35...40 ms latching and 50...100 ms unlatching, which is standard for a frame this size — fast enough for most motor starting and isolation sequences.
Key ratings in context
Rated for 220...230 V AC/DC control circuits with a tolerance band of 0.85...1.1 Uc for both latching and unlatching. That means the coil holds in down to about 187 V and up to 253 V — useful if your control transformer sags under load or your DC bus regulation is loose. That is adequate for occasional switching in HVAC or pump panels but not for high-speed sorting or press lines.