Skip to main content
Schneider Electric LX1D2N5

Schneider LX1D2N5 TeSys contactor coil, 415 V AC 50 Hz

MPN LX1D2N5
Obsolete

Schneider Electric TeSys D contactor coil, LX1D2N5, 415 V AC 50 Hz, 60 VA inrush, 7 VA hold, 2219 Ohm coil resistance, without built-in suppressor module.

$96.70 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1D2N5 specifications
ParameterValue
Control circuit typeAC at 50 Hz
Main product or component typeContactor coil
Coil voltage415 V AC 50 Hz

Product details

Coil for 9–18 A TeSys D contactors

The LX1D2N5 is the replacement coil for Schneider TeSys D contactors rated 9 through 18 A — the LC1D09 through LC1D18 frame sizes. It is a bare coil without a built-in suppressor module, so you must add an RC snubber or varistor across the terminals if the control circuit drives an electronic output. Inrush is 60 VA at cos φ 0.75; sealed hold drops to 7 VA at cos φ 0.3. The DC resistance measures 2219 Ω at 20 °C, and the closed-circuit inductance is 78 H.

Obsolete — last-time-buy window closed

Schneider has marked the LX1D2N5 as obsolete. No official successor part number has been published. For a like-for-like replacement, the only channel is independent surplus or last-time-buy stock — quantities are finite and confirmed per RFQ. If you are holding a panel with a failed LX1D2N5, verify the contactor frame size (LC1D09 through LC1D18) and the coil voltage before ordering. The coil mounts with the standard TeSys D clip; no wiring harness modification is needed if the original suppressor module is reused externally.

MPN
LX1D2N5