What this coil does and where it fits
The LX1D2U6 is a replacement coil for the TeSys D contactor family, specifically the 9 A through 18 A frame sizes. It runs on 240 V AC at 60 Hz, with an inrush of 70 VA and a hold-in draw of 7.5 VA — the drop between pickup and sealed power tells you the contactor's magnetic circuit is pulling in hard then latching.
Lifecycle reality — obsolete, but still sourceable
Schneider Electric lists this coil as obsolete. That means no factory-new production — the stock you find is either NOS (new old stock) or pulled from surplus channels. If your panel has a TeSys D contactor with a failed coil, this is the direct drop-in replacement; there is no official successor part number from Schneider.
Coil specs that matter for the swap
Coil resistance is 587.4 Ohm at 68 °F (20 °C). The inductance of the closed circuit is 21 H — that's the value you'd use if you're checking the coil with an LCR meter on a bench.
Sourcing this coil for a repair or BOM fill
Because it's obsolete, this isn't a stock-on-the-shelf item. We source it through independent distribution — quantities are confirmed at RFQ, and pricing reflects the surplus market, not factory list. If you're filling a BOM line for a panel rebuild or a line-down repair, send the RFQ with the quantity and we'll quote availability.