Skip to main content
Schneider Electric LX1FF910

Schneider LX1FF910 TeSys F Contactor Coil, 910 V AC 50 Hz

MPN LX1FF910
Obsolete

Schneider Electric TeSys F series, LX1FF910 contactor coil, 910 V AC 50 Hz, 550 VA inrush, 45 VA hold-in.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FF910 specifications
ParameterValue
Control circuit typeAC 50 Hz
Main product or component typeContactor coil
Coil voltage910 V AC 50 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time23...35 ms closing 5...15 ms opening
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX1FF910 is a replacement coil for TeSys F contactors, wound for 910 V AC 50 Hz control circuits. It is the energizing element that pulls the contactor in and holds it closed — no built-in suppressor module, so you add the RC snubber or varistor externally if the application demands it.

Coil inrush draws 550 VA at 50 Hz (cos φ 0.3), dropping to 45 VA once the contactor seals. That inrush-to-seal ratio is typical for AC-operated F-frame coils; the control transformer feeding it must be sized for the peak, not the hold-in. The coil operates between 0.85 and 1.1 Uc and drops out between 0.35 and 0.55 Uc at 131 °F (55 °C).

Schneider has marked the LX1FF910 as obsolete. There is no official direct successor order code in the TeSys F range for a 910 V AC 50 Hz coil.

MPN
LX1FF910