Skip to main content
Log in
Schneider Electric LX1FL080 — Contactor & Starter Coils

Schneider LX1FL080 TeSys Contactor Coil, 80 V AC 50/60 Hz

MPNLX1FL080
Active

Schneider TeSys LX1FL080 contactor coil, 80 V AC 50/60 Hz, without built-in suppressor module, mechanical durability 5 Mcycles, maximum operating rate 1200 cyc/h at 55 °C.

Schneider Electric LX1FL080 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LX1FL080 — Identification
ParameterValue
Product typeContactor coil
Product rangeTeSys
Device short nameLX1FL
Coil technologyWithout built-in suppressor module
LX1FL080 — Electrical
ParameterValue
Control circuit voltage [Uc]80 V AC 50/60 Hz
Control circuit typeAC 50/60 Hz
LX1FL080 — Performance & Durability
ParameterValue
Max. operating rate1200 cyc/h 131 °F (55 °C)
Mechanical durability5 Mcycles

Product details

The Schneider TeSys LX1FL080 is a replacement contactor coil for the LX1F range, wound for 80 V AC at 50/60 Hz. It drives the contactor armature — no built-in suppressor module, so you add your own RC snubber or varistor across the coil terminals if the control circuit needs it. Rated for 5 Mcycles mechanical endurance and a maximum operating rate of 1200 cycles per hour at 55 °C, this coil handles high-duty cycling on conveyor or pump start-stop sequences without accelerated wear.

Integration note

No suppressor inside the coil housing — if your panel has a PLC output or a solid-state relay driving this coil, fit a flyback diode (for DC) or an RC snubber (for AC) across the coil terminals. The 80 V AC control voltage is common in legacy European panels; confirm your control transformer taps before wiring.

Frequently asked questions

What is the closest pin-compatible alternative to LX1FL080 in this component family?

Within the TeSys LX1F coil family, the closest alternative is a different voltage variant — for example, LX1FL110 for 110 V AC or LX1FL220 for 220–240 V AC. There is no pin-compatible alternative at the same 80 V AC rating; the coil form factor and mounting are identical across the LX1F range.

What compliance documentation does this brand provide for LX1FL080?

Schneider Electric provides RoHS and REACH declarations for the TeSys LX1F coil series. UL and CSA certifications apply to the contactor assembly; the coil itself carries CE marking. Specific documentation is available on request.

MPN
LX1FL080