The LX1FX260 is a replacement contactor coil from the Schneider Electric TeSys range, designed for LX1F contactors. It operates on a 260 V AC control circuit at 50/60 Hz, which means it pulls in and holds the contactor armature when that voltage is applied across the coil terminals — no DC conversion or rectifier needed inside the panel. This coil ships without a built-in suppressor module. For inductive-load switching, you will need to add an external RC snubber or a free-wheeling diode across the coil terminals to limit voltage spikes during de-energization — standard practice for AC coils driving contactors in PLC or relay logic circuits.
Ratings that govern the duty cycle
Rated for 5 Mcycles mechanical durability, which is the expected life before the coil or armature mechanism wears out — not the electrical switching life of the main contactor poles, but the coil's own mechanical endurance. At a maximum operating rate of 600 cycles per hour at 55 °C, this coil is suited for moderate-speed applications like conveyor interlocks or pump start/stop sequences; sustained high-speed pick-and-drop operations would exceed the thermal rise budget.