Control coil for LC1G630-800/4P contactors
The LX1G4TLSEN is a control module from the TeSys Giga range, designed specifically for the LC1G630-800/4P standard version contactor. It operates on a 200-500 V AC/DC control circuit at 50/60 Hz, covering both AC and DC supply rails without needing a separate rectifier module. The coil uses built-in bidirectional peak limiting technology, which clamps voltage spikes at the coil terminals — this extends the life of the control relay contacts and reduces radiated EMI in the panel. Inrush power hits 390 W (670 VA), then drops to 11 W (17 VA) holding, so the control transformer sizing needs to handle the inrush peak, not just the sealed VA.
Operating envelope and integration
Opening time is 20-35 ms, closing 40-55 ms — fast enough for motor starting duty cycles on pumps and conveyors, but not a high-speed switching coil. Maximum operating rate is 600 cycles per minute at 60 °C, which suits frequent start-stop applications within the TeSys Giga frame. Mechanical durability is rated at 5 million cycles, and the coil operates from -25 °C to 60 °C ambient with storage down to -60 °C. Pollution degree 3 per IEC 60947-1 means it handles conductive pollution in industrial enclosures without conformal coating on the coil assembly. Control circuit termination uses push-in terminals accepting 0.2-2.5 mm² solid or stranded wire (AWG 26-12), or 0.25-2.5 mm² flexible with ferrules. The IP20 finger-safe housing protects against accidental contact during panel wiring.
Compliance and sourcing posture
Sourced to order against the BOM quantity through independent distribution. The coil mates only with the LC1G630-800/4P contactor; confirm the contactor frame before committing the line item.