Schneider Electric TeSys range, LX1LB090 replacement coil, 90 V AC 50 Hz control circuit voltage, 70.68 Ohm resistance, 75 VA inrush / 8 VA sealed power consumption.
| Parameter | Value |
|---|---|
| Product type | Coil |
| Product range | TeSys |
| Device short name | LX1 |
| Parameter | Value |
|---|---|
| Control circuit voltage [Uc] | 90 V AC 50 Hz |
| Coil resistance (avg.) | 70.68 Ohm at 68 °F (20 °C) +/- 10 % |
| Coil inductance | 0.95 mH |
| Parameter | Value |
|---|---|
| Power consumption (VA) | 75 VA AC 0.55 50 Hz inrush 8 VA AC 0.28 50 Hz sealed |
The Schneider Electric LX1LB090 is a replacement coil from the TeSys range, designed for LX1 series contactors. It operates on a 90 V AC 50 Hz control circuit voltage, drawing 75 VA inrush and 8 VA sealed. The coil has an average resistance of 70.68 Ohm at 68 °F (20 °C) ±10% and an inductance of 0.95 mH, which determines the pickup and dropout timing for the contactor.
The LX1LB090 is rated for a 90 V AC 50 Hz control circuit voltage. Verify your panel supply matches this before ordering.
The coil draws 75 VA inrush and 8 VA sealed at 50 Hz. The sealed value is the continuous load the control transformer must support once the contactor is picked up.