It draws 75 VA inrush and settles to 8 VA sealed, which is the steady-state load the control transformer or PLC output must support while the contactor is held in. Coil resistance measures 682.84 Ohm at 20 °C, ±10 %, with an inductance of 6.6 H. That resistance figure is useful for verifying the coil against a known-good part during troubleshooting — a shorted or open winding will read well outside that band.
Schneider Electric LX1LB270 TeSys Coil, 270 V AC 50 Hz
MPNLX1LB270
Active
Schneider Electric TeSys LX1, replacement coil LX1LB270, 270 V AC 50 Hz, 75 VA inrush / 8 VA sealed.
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Coil |
| Product range | TeSys |
| Device short name | LX1 |
| Parameter | Value |
|---|---|
| Control circuit voltage [Uc] | 270 V AC 50 Hz |
| Coil resistance (avg.) | 682.84 Ohm at 68 °F (20 °C) +/- 10 % |
| Coil inductance | 6.6 H |
| Parameter | Value |
|---|---|
| Power consumption (VA) | 75 VA AC 0.55 50 Hz inrush 8 VA AC 0.28 50 Hz sealed |
Product details
Frequently asked questions
What is the control voltage for this coil?
270 V AC at 50 Hz. The inrush power is 75 VA; sealed power is 8 VA.
What is the coil resistance and inductance?
Resistance is 682.84 Ohm at 20 °C, ±10 %. Inductance is 6.6 H.
MPN
LX1LB270